The dimmer used can vary depending on the type of lighting fixture being controlled. Leading edge dimmers are typically used with incandescent and halogen bulbs, while trailing edge dimmers are more commonly used with LED and CFL bulbs. It is important to match the dimmer type with the appropriate lighting technology to ensure optimal performance and compatibility. **

Trailing-edge dimmers are typically used for LED and electronic low-voltage lighting, as they provide a smoother dimming experience and help prevent flickering. On the other hand, leading-edge dimmers are more commonly used for incandescent and halogen lighting. The choice between leading-edge and trailing-edge dimmers depends on the type of lighting being used and the desired dimming performance. **

Yes, that is trailing behind. It appears to be following at a distance. **

To plant trailing geraniums correctly, start by choosing a location that receives full sun to partial shade. Make sure the soil is well-draining and amend it with compost if needed. Dig a hole slightly larger than the root ball of the geranium and place the plant in the hole, making sure it sits at the same level as it was in the container. Water the plant thoroughly after planting and continue to water regularly, allowing the soil to dry out slightly between waterings. Fertilize the geraniums every 4-6 weeks with a balanced fertilizer to promote healthy growth and blooming. **

The Samsung Galaxy S7 Edge is not completely waterproof, but it is water-resistant. It has an IP68 rating, which means it can withstand being submerged in up to 1.5 meters of water for up to 30 minutes. However, it is important to note that water damage is not covered under the device's warranty, so it is still recommended to avoid exposing it to water whenever possible. **

No, the Samsung Galaxy S7 Edge is not waterproof with a broken back. The waterproofing of the device relies on the integrity of the back cover and seals to keep water out. If the back is broken, it compromises the waterproofing of the device, making it susceptible to water damage. It is important to repair the broken back of the device to maintain its waterproof capabilities. **

Image trailing effects, also known as ghosting, on monitors can be caused by a few different factors. One common reason is slow response time of the monitor, which can result in images not refreshing quickly enough and leaving a trail behind moving objects. Another reason can be the use of outdated or low-quality cables, which can result in signal interference and ghosting. Additionally, if the monitor's refresh rate is not properly synchronized with the graphics card, it can lead to ghosting effects. Finally, image trailing can also be caused by a phenomenon called overdrive, where the pixels on the screen cannot transition between colors fast enough, resulting in ghosting. **

To sew leather edge to edge, you will need a leather needle, heavy-duty thread, and a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot. First, align the edges of the leather pieces and secure them in place with clips or pins. Then, use a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot to sew the edges together using a straight stitch. Make sure to use a longer stitch length and go slowly to ensure even stitching. Finally, backstitch at the beginning and end of the seam to secure the stitches. **